Single Phase Flow Pressure Drop in Glass Ballotini Particulate Beds

A study was made of pressure drop during single fluid phase flow to determine the pressure drop characteristic of the porous media (glass ballotini particulate beds) for coalescence. It is also served to check the reproducibility of the packing technique, and to detect any foreign particulate matter or re-arrangement of the individual particles in the coalesce bed. Furthermore these data provided a basis for comparison with that during two-phase flow with coalescence. For spherical particle the modified Carman-Kozeny equation was applied; the commonly accepted value for Kozeny constant is 5.0. However, K, depends on, among other factors, the structure of the bed, voidage fraction, particle shape, tortuosity, superficial velocity, bed depth, particle size, and wall effect.     

Role of brown adipose tissue in thermogenesis induced by overfeeding a diet containing medium chain triglyceride

The role of brown adipose tissue in the mechanism of medium chain triglyceride (MCT)-induced thermogenesis was investigated. Under anesthesia, the interscapular brown adipose tissue (IBAT) was excised in male Sprague-Dawley rats, and the animals were fitted with gastrostomy tubes. After a 10-day recovery period, the animals were divided into two groups: one group received a diet containing MCT as 50% of calories, and the other group received an isocaloric diet containing long chain triglyceride (LCT). The diets were fed for 6 wk at a level of calorie intake that was 150% of the ad libitum intake of a parallel control group. During the last week of the study, resting and norepinephrine (NE)-stimulated O₂ consumption and CO₂ production were measured in a Noyons diaferometer. At the end of 6 wk, the animals were weighed and killed. The individual fat pads were dissected and weighed, and an aliquot of the right retroperitoneal fat pad was used to measure adipocyte size and number. The results showed that body weight and adipocyte size (but not adipocyte number) were significantly smaller in the MCT-fed compared to the LCT-fed animals. Resting as well as maximal NE-stimulated oxygen consumption values were significantly higher in the MCT-fed than the LCT-fed rats. It is concluded that the enhanced thermogenesis induced by MCT persists despite the absence of IBAT and that the phenomenon is likely related to more extensive oxidation of MCT-in contrast to LCT-derived fatty acids, thus leading to increased oxygen consumption, enhanced dissipation of energy as heat and diminished efficiency of weight gain and deposition of body fat. Presented at the symposium on “Specialty Lipids and Their Biofunctionality” at the annual meeting of the American Oil Chemists' Society, Philadelphia, May 1985.     

Dynamics-based amplification of RNA function and its characterization by using NMR spectroscopy

The ever-increasing cellular roles ascribed to RNA raise fundamental questions regarding how a biopolymer composed of only four chemically similar building-block nucleotides achieves such functional diversity. Here, I discuss how RNA achieves added mechanistic and chemical complexity by undergoing highly controlled conformational changes in response to a variety of cellular signals. I examine pathways for achieving selectivity in these conformational changes that rely to different extents on the structure and dynamics of RNA. Finally, I review solution-state NMR techniques that can be used to characterize RNA structural dynamics and its relationship to function.     

Sharing Malaysian experience with the development of biotechnology-derived food crops

Biotechnology-derived food crops are currently being developed in Malaysia mainly for disease resistance and improved post harvest quality. The modern biotechnology approach is adopted because of its potential to overcome constraints faced by conventional breeding techniques. Research on the development of biotechnology-derived papaya, pineapple, chili, passion fruit, and citrus is currently under way. Biotechnology-derived papaya developed for resistance to papaya ringspot virus (PRSV) and improved postharvest qualities is at the field evaluation stage. Pineapple developed for resistance to fruit black heart disorder is also being evaluated for proof-of-concept. Other biotechnology-derived food crops are at early stages of gene cloning and transformation. Activities and products involving biotechnology-derived crops will be fully regulated in the near future under the Malaysian Biosafety Law. At present they are governed only by guidelines formulated by the Genetic Modification Advisory Committee (GMAC), Malaysia. Commercialization of biotechnology-derived crops involves steps that require GMAC approval for all field evaluations and food-safety assessments before the products are placed on the market. Public acceptance of the biotechnology product is another important factor for successful commercialization. Understanding of biotechnology is generally low among Malaysians, which may lead to low acceptance of biotechnology-derived products. Initiatives are being taken by local organizations to improve public awareness and acceptance of biotechnology. Future research on plant biotechnology will focus on the development of nutritionally enhanced biotechnology-derived food crops that can provide more benefits to consumers.     

Intercostal thorascopic harvesting of the internal mammary artery for supercharging a pedicled rectus abdominis flap

This review on non-heartbeating donation focusses on three issues: the number of kidneys procured from a non-heartbeating donor programme, the transplant results and the influence of a non-heartbeating programme on public opinion regarding transplantation.     

Improvement of plasma lipoprotein profiles during high-flux dialysis

Patients undergoing maintenance hemodialysis therapy have increased mortality due to cardiovascular disease. One possible etiologic factor for this increased mortality is the lipid abnormalities associated with chronic renal failure. These include elevated triglyceride (TG) and decreased high-density lipoprotein (HDL) concentrations. Lipoprotein profiles of patients undergoing chronic hemodialysis with either saponified cellulose ester (CE) (N = 9) or polysulfone (PS) high-flux dialysis membranes (N = 10) were compared. Patients in each group received similar amounts of heparin during the dialysis. CE-dialyzed patients showed no alteration in serum TG, HDL, low-density lipoprotein, or total cholesterol when predialysis and postdialysis values were compared. PS patients, on the other hand, had a significant decrease in TG concentrations (P < 0.01) as well as a significant rise in HDL (P < 0.01). These changes might signify activation of lipoprotein lipase (LPL) during dialysis. LPL activity in PS sera was significantly greater than LPL in CE sera. Moreover, sera from PS patients inhibited LPL much less than did sera from CE patients. These findings suggest that a circulating substance not dialyzable with cellulosic membranes inhibits LPL in uremic subjects and is removed during dialysis with a PS membrane. Alternatively, the greater biocompatibility of PS may produce less LPL inhibitory cytokines during dialysis. The improvement of lipoprotein profiles in patients receiving dialysis with PS membranes may, in the long term, lead to less morbidity and mortality from atherosclerotic disease.     

Ethanol and lactic acid production using sap squeezed from old oil palm trunks felled for replanting

Old oil palm trunks that had been felled for replanting were found to contain large quantities of high glucose content sap. Notably, the sap in the inner part of the trunk accounted for more than 80% of the whole trunk weight. The glucose concentration of the sap from the inner part was 85.2 g/L and decreased towards the outer part. Other sugars found in relatively low concentrations were sucrose, fructose, galactose, xylose, and rhamnose. In addition, oil palm sap was found to be rich in various kinds of amino acids, organic acids, minerals and vitamins. Based on these findings, we fermented the sap to produce ethanol using the sake brewing yeast strain, Saccharomyces cerevisiae Kyokai no.7. Ethanol was produced from the sap without the addition of nutrients, at a comparable rate and yield to the reference fermentation on YPD medium with glucose as a carbon source. Likewise, we produced lactic acid, a promising material for bio-plastics, poly-lactate, from the sap using the homolactic acid bacterium Lactobacillus lactis ATCC19435. We confirmed that sugars contained in the sap were readily converted to lactic acid with almost the same efficiency as the reference fermentation on MSR medium with glucose as a substrate. These results indicate that oil palm trunks felled for replanting are a significant resource for the production of fuel ethanol and lactic acid in palm oil-producing countries such as Malaysia and Indonesia.     

Strength of resin-coated-adhesive-bonded double lap-shear pultrusion joints at ambient temperature

The inherited adhesion limitation of polyester and vinyl ester resin-based pultruded GFRP makes pultrusions difficult to bond, especially when a thixotropic adhesive is used. While such an adhesive is necessary for gap filling, it has a limited wettability. Therefore, coating the adherend with low-viscosity epoxy resin, prior to bonding, improves wetting and hence increases joint strength. The paper describes the experimental methodology to achieve this, using double lap-shear (DLS) joints with various materials combinations. A significant strength improvement was reached as a result of coating the inner adherend in conjunction with using a “high adhesion” outer adherend. To further understand the effect of coating, numerical stress analysis was undertaken, including preliminary micro-models representing the composite/adhesive interface as well as overall DLS models.     

Evaluation on some finishing properties of oil palm plywood

Oil palm is the largest and most important plantation crop in Malaysia. The oil palm generally lasts for 25–30 years before the next replantation is done. Substantial amount of biomass in the form of palm trunk results from plantation cycle. This resource is simply left on the ground to decay and is not used as raw material to manufacture any kind of value-added products. The objective of this study was to investigate the possibility of manufacturing plywood from oil palm trunks and to evaluate some of the finishing properties of such experimental panels in comparison to those from Shorea sp as control samples. Three-ply plywood samples were produced from 5 mm thick veneers of oil palm using urea formaldehyde adhesive. Three types of chemicals, namely nitrocellulose, pre-catalyzed lacquer and polyurethane were used to finish experimental panels. The surface finished with nitrocellulose had the lowest contact angle on raw surface of oil palm plywood and wood. The average cross cut tape index of oil palm plywood was comparable to Shorea sp. All finishing materials of oil palm plywood produced impact rating of 4 except for surface finished with nitrocellulose while finishing on wood indicated an impact rating of 3. Oil palm plywood had higher weight loss compared to Shorea sp. Based on results from contact angle, cross cut tape index, impact rate test, weathering, and soil burial test methods it appears that the samples showed acceptable finishing properties comparable to those of solid wood.     

Siamese convolutional neural network and fusion of the best overlapping blocks for kinship verification

Multimedia Tools and Applications - Analysis of facial images decoding familial features has been attracting the attention of researchers to develop a computerized system interested in determining...